Replace HP Pavilion DV2000 lcd Screen step by step
When the laptop LCD panel in a laptop gets cracked, there is not much more that you can do about it other than simply replacing it. The cost for the HP Pavilion DV2000 lcd Screen itself will likely be fairly expensive. The process involved will be only slightly different between laptop makes and models, so these step by step instructions will apply to the vast majority of laptops.
First, you shouuld make sure the laptop is not connected to any power source and that the laptop battery has been removed. Have you have ever noticed the little rubber dots along the plastic edge, bezel, of your HP Pavilion DV2000 lcd Screen ? Those are actually screw hole covers. Start by carefully removing these with the edge of a very fine flat head screw driver and set them aside. You could also use any fine pointed tool or the tip of a small knife. You can now access and remove the bezel screws.
When removing these parts and screws during this process, it is a good idea to set them aside in an organized fashion that will allow you to work your way backwards through these steps when it comes time to install the replacement HP Pavilion DV2000 lcd Screen. Always be extra careful when handling the new replacement laptop LCD panel as these are easily scratched during the installation process.
Once the bezel has been removed you will want to remove the very tiny screws along the frame of the laptop LCD panel. These secure the HP Pavilion DV2000 lcd Screen to the rest of the laptop. Once this has been done you will be able to lay the screen down and unplug the video cable. The video cable is a wide flat cable that will be around one to two and half inches wide or so. Many times this cable will have a piece of yellow tape over it.
The next step, you can remove the inverter cable. This usually has two wires connecting to a plastic end piece which clips into the HP Pavilion DV2000 lcd Screen inverter. There is usually one pink wire, and one white wire. The inverter itself is an elongated, narrow circuit board contained within a clear plastic cover. There may be a screw in the inverter will have to be removed in order to unplug the wires.
Article Source:http://www.articlesbase.com/laptops-articles/replace-hp-pavilion-dv2000-lcd-screen-step-by-step-1647319.html
Related articles by Zemanta
- 13 reviews of Apple MacBook Air (rateitall.com)
- HP’s ProBook 5310m and Pavilion dm3 keep “thin-and-light” cheap enough for the rest of us (engadget.com)
- 5 reviews of Toshiba Dynadock U Universal USB Connect Docking Station (rateitall.com)
- Dell Latitude D620 Battery (slideshare.net)
![Reblog this post [with Zemanta]](http://img.zemanta.com/reblog_e.png?x-id=0481cdad-d972-43b0-95e9-fdb62a3b553e)
Related Posts
- Talk about Lenovo Laptop Batteries
- 2010 Samsung Laptop Computers
- Keep your laptop warm this winter
- 2010 New Dell Laptop Computer
- Dell Laptop - Dell Vostro V13 Slim and Sleek Business Laptop
- Tweezers and other handy keyboard tools
